Showing 476 results

File consists of one technical drawing by Cleaver Brooks Co. showing the circuit schema for the boiler and hot water system.

File consists of one architectural drawing by A.C. Rieder, architect, showing the proposed floor plan for the kitchen of the YWCA building on Frederick St.

File consists of one architectural drawing showing proposed alterations to the YWCA. Plans are by architectural firm Barnett, Rieder and Hymmen.

File consists of twenty six photocopies of architectural drawings showing the Lincoln Road Housing Project. Includes drawings of the exterior, floor plans, and elevations.

File consists of two architectural drawings showing revisions to original plans of the YWCA for the second floor, ground floor kitchen, basement, and third floor laundry. Plans are by architectural firm Barnett, Rieder and Hymmen.

File consists of one architectural drawing by City Engineer's Office [Kitchener] of a proposal for the rebuilding of the YWCA front entrance steps after the widening of Frederick St.

File consists of one architectural drawing by Keuffel and Esser Co. showing the proposed widening of Frederick St.

File consists of one architectural drawing showing a study of the YWCA drive way.

File consists of three architectural drawings by William Lyon Somerville Architects, showing floor plans for the basement, ground floor and third floor of a proposed addition to the YWCA building.

File consists of three architectural drawings by William Lyon Somerville Architects, showing floor plans for the basement, ground floor and third floor of a proposed addition to the YWCA building.

File consists of four architectural drawings by Rieder, Hymmen and Lobban Architects, showing floor plans for the basement, ground floor, second floor and third floor of proposed renovations at the YWCA building.

File consists of four architectural drawings by Knechtel and Shmalz Architects, showing floor plans for the ground floor, second floor, third floor and basement of a proposed addition to the YWCA building.

File consists of one architectural drawing showing the front elevation of the YWCA and the proposed location of the new sign. Drawing is by Neon Products of Canada.

A hand drawn floor plan for the Schantz family home located at 43 Schneider Avenue, Kitchener, Ont. This is likely the original floor plan for the house. It is possible that not all of the rooms shown on this floor plan were physically constructed when the house was built.

File consists of architectural drawings for the resort proposed for the Roseneath property. Plans created by Strong and Associates Architects and Planners. Includes a site plan for the property and drawings of the various buildings (administration, staff, restaurant/athletic centre, housing units, etc.).

File consists of a signed agreement between the Lake Joseph Club and the Muskoka Lakes Association regarding a condominium development by the Club. Also present are a master plan of the development and a plan of Phase 1 of the development as schedules to the agreement.

Materials related to the Trinity archives relocation at the University of Toronto. Inlcudes perspective views.

Plans for the new Canada Hall Museum of Civilization, including images of floorplans and details of the exhibition.

Material relating to the fountain erected as a memorial to J.M. and Helena Schneider by their children in 1964 at Rockway Gardens, Kitchener, Ont. Includes correspondence regarding Niagara Fountains, costs and maintenance, clippings, blueprints, and the original typescript dedication by given by Norman C. Schneider on September 27, 1964.

Series consists of architectural drawings and plans for the Kitchener Plant of Kaufman Footwear, created between 1920 and 1996. Includes work by Albert Kahn, Barnett & Rieder and the Walter Fedy Partnership. Includes blueprints blackprints and blueline prints.

Job No. 964, May 3, 1920. Scale differs.
Sheet 1: Heating riser diagram, plot plan, foundation plan, basement plan.
Sheet 2: Interior elevations of entrance lobby, Mr. Kaufman's office, ceiling plans for entrance lobby, Mr. Kaufman's office, two first floor plans, detail of wicket, detail of shelf and counter in general office.
Sheet 3: Flag pole, roof, second floor, third and fourth floor plans.
Sheet 4: South elevation, corner elevation, East elevation, North elevation, Northwest corner elevation, section on line AA.
Sheet 5: Scale details of main entrance elevation.
Sheet 6: Details: windows, wall sections, toilets, "elevations of Mr. Newton's room".
Sheet 7: Elevations showing windows and doors.
Sheet 8: Elevations: South, corner, East, North, Northwest corner [re windows?].
Sheet 1-S: Columns, dated Apr. 10, 1920.

Job No. 964, May 3, 1920. Scale differs.
Sheet 1: Heating riser diagram, plot plan, foundation plan, basement plan.
Sheet 2: Interior elevations of entrance lobby, Mr. Kaufman's office, ceiling plans for entrance lobby, Mr. Kaufman's office, two first floor plans, detail of wicket, detail of shelf and counter in general office.
Sheet 3: Flag pole, roof, second floor, third and fourth floor plans.
Sheet 4: South elevation, corner elevation, East elevation, North elevation, Northwest corner elevation, section on line AA.
Sheet 5: Scale details of main entrance elevation.
Sheet 6: Details: windows, wall sections, toilets, "elevations of Mr. Newton's room".
Sheet 7: Elevations showing windows and doors.
Sheet 8: Elevations: South, corner, East, North, Northwest corner [re windows?].
Sheet 1-S: Columns, dated Apr. 10, 1920.

Job No. 964, May 3, 1920. Scale differs.
Sheet 1: Heating riser diagram, plot plan, foundation plan, basement plan (3 copies).
Sheet 2: Interior elevations of entrance lobby, Mr. Kaufman's office, ceiling plans for entrance lobby, Mr. Kaufman's office, two first floor plans, detail of wicket, detail of shelf and counter in general office (3 copies).
Sheet 3: Flag pole, roof, second floor, third and fourth floor plans (3 copies).
Sheet 4: South elevation, corner elevation, East elevation, North elevation, Northwest corner elevation, section on line AA (3 copies).
Sheet 5: Scale details of main entrance elevation (1 copy).
Sheet 6: Details: windows, wall sections, toilets, "elevations of Mr. Newton's room" (3 copies).
Sheet 7: Elevations showing windows and doors (2 copies).
Sheet 8: Elevations: South, corner, East, North, Northwest corner [re windows?] (2 copies).
Sheet 1-S: Columns, dated Apr. 10, 1920 (2 copies).

Job No. 964, May 3, 1920. Scale differs.
Sheet 1: Heating riser diagram, plot plan, foundation plan, basement plan.
Sheet 2: Interior elevations of entrance lobby, Mr. Kaufman's office, ceiling plans for entrance lobby, Mr. Kaufman's office, two first floor plans, detail of wicket, detail of shelf and counter in general office.
Sheet 3: Flag pole, roof, second floor, third and fourth floor plans.
Sheet 4: South elevation, corner elevation, East elevation, North elevation, Northwest corner elevation, section on line AA.
Sheet 5: Scale details of main entrance elevation.
Sheet 6: Details: windows, wall sections, toilets, "elevations of Mr. Newton's room".
Sheet 7: Elevations showing windows and doors.
Sheet 8: Elevations: South, corner, East, North, Northwest corner [re windows?].
Sheet 1-S: Columns, dated Apr. 10, 1920.

Drawings by TRUSCON Building Products:
Drawing no. T-7135A: Elevator details, Mar. 16, 1925, rev. Mar. 20, 1925 (2 copies)
Drawing no. T-7135C: Column schedule and footing details, Mar. 25, 1925, rev. Mar. 30, Apr. 9, 1925.

Job No. 964B, Feb. 21, 1925:
Sheet 1: Plot plan, basement and foundation plan, rev. Apr. 8, 1925 (3 copies).
Sheet 2: First floor plan, rev. Apr. 8, 1925 (3 copies).
Sheet 3: Typical floor plan, rev. Mar. 4 and Apr. 8, 1925 (3 copies).
Sheet 4: Fifth floor plan, rev. Apr. 8, 1925 (3 copies).
Sheet 5: Roof plan and cross section, detail of spandrels, rev. Mar. 4 and Apr. 8, 1925 (3 copies).
Sheet 6: Victoria and King St. elevations, rev. Apr. 8, 1925 (3 copies).
Sheet 7: Elevation and section of AA and rear elevation, Feb. 21, 1925, rev. Apr. 8, 1925 (3 copies).
Sheet 8: Elevator details, Feb. 21, 1925, rev. Apr. 8, 1925 (3 copies).
Sheet 9: Untitled, Mar. 16, 1925 (3 copies).
Sheet 1-S: Columns, footings and beam schedule, Feb. 21, 1925, rev. Apr. 6, 1925, revision #1 (3 copies).
Sheet 2-S: Floor plans, beam schedule, Feb. 21, 1925, rev. Apr. 6, 1925, revision #1 (3 copies).
Sheet 3-S: Alternate design of footings, Feb. 21, 1925, rev. Apr. 6, 1925, revision #1 (3 copies).

Job No. 964B, Feb. 21, 1925:
Sheet 1: Plot plan, basement and foundation plan, rev. Apr. 8, 1925 (2 copies).
Sheet 2: First floor plan, rev. Apr. 8, 1925 (2 copies).
Sheet 3: Typical floor plan, rev. Mar. 4 and Apr. 8, 1925 (2 copies).
Sheet 4: Fifth floor plan, rev. Apr. 8, 1925 (2 copies).
Sheet 5: Roof plan and cross section, detail of spandrels, rev. Mar. 4 and Apr. 8, 1925 (2 copies).
Sheet 6: Victoria and King St. elevations, rev. Apr. 8, 1925 (2 copies).
Sheet 7: Elevation and section of AA and rear elevation, Feb. 21, 1925, rev. Apr. 8, 1925 (2 copies).
Sheet 8: Elevator details, Feb. 21, 1925, rev. Apr. 8, 1925 (2 copies).
Sheet 9: Untitled, Mar. 16, 1925 (2 copies).
Sheet 1-S: Columns, footings and beam schedule, Feb. 21, 1925, rev. Apr. 6, 1925, revision #1 (2 copies).
Sheet 2-S: Floor plans, beam schedule, Feb. 21, 1925, rev. Apr. 6, 1925, revision #1 (2 copies).
Sheet 3-S: Alternate design of footings, Feb. 21, 1925, rev. Apr. 6, 1925, revision #1 (2 copies).

Contents:
Sheet 1: Plot plan, Nov. 1956, scale 1" to 40' (7 copies).

Job No. 11-95-07, June 12, 1995:
Sheet A1: Second floor.
Sheet A2: Third floor.
Sheet A3: Fourth floor.

Drawings dated 1995-06-08, scale differs:
Sheet SK 1: Second floor, scheme A.
Sheet SK 2: Second floor, scheme B.
Sheet SK 3: Third floor.
Sheet SK 4: Second floor (with atrium).
Sheet SK 5: Third floor (with atrium).
Sheet SK 6: Desk layouts.
Sheet SK 7: Interior elevations.

Drawings, some undated and some dated 1995-06-08, scale differs:
Sheet [SK 1 or 2]: Second floor [unnumbered, undated].
Sheet [SK 3]: Third floor [unnumbered, undated].
Sheet [SK 4]: Second floor (with atrium)[unnumbered, undated].
Sheet [SK 5]: Third floor (with atrium), col. [unnumbered, undated]
Sheet SK 5: Third floor (with atrium), 1995-06-08.
Sheet [SK 6]: Desk layouts, col. [unnumbered, undated].
Sheet [SK 7]: Interior elevations [unnumbered, undated].
Sheet SK 7: Interior elevations, 1995-06-08.

One bound set of drawings. Includes a cover sheet with a list of drawings and statement "Bid period no. 3".

Contains two blueprints for lettering and splashguards and an inventory list.

File consists of ten architectural drawings (bound together) showing proposed additions to the A.R. Kaufman Family YMCA. Plans are marked set no. 10.

Plans for Dominion Rubber Company plots and tire stores. Includes the plot plan for Windsor (Ontario) from February 1962, and the preliminary sketch plan no. 1 ground floor plan of Dominion Tire Store for Vancouver (British Columbia) from May 1959.

Contains an architectural drawing of the proposed manufacturing plant in Vancouver, British Columbia by Barnett & Rieder, architects. Plans of both the exterior and interior of the plant are included.

Contains sheets 1, 9 and 10 of 17 of architectural and technical drawings relating to Dare Foods Limited building in Surrey, B.C. The drawings are by Dominion Construction Co. Ltd., engineers and contractors, Vancouver, B.C. All three are drawn by Sorensen. The architectural drawing is a plot plan for the plant. The technical drawings consist of septic tank, structural steel, and miscellaneous steel details.

Consists of material relating to the Dare Foods Limited biscuit plant in Surrey, B.C. File contains invitations; programs; newspaper clippings; agenda; speeches from the plant opening 1962; three b&w photographs each 20.5 x 25.5 cm, 1961-1962; one promotional pamphlet for new plant 1962; and one plan by the Canadian Industrial Risks Insurers plan of Dare Foods Ltd., Surrey B.C. plant 1981.

Contains records pertaining to the Biscuit Division plant tour. File consists of notes on the company profile of Dare Foods, notes on the role of Dare Foods in the Quebec economy, notes on the purpose and objectives of Dare Foods, a plan of the Kitchener biscuit plant, and descriptions of each area, special rooms and machines in the biscuit plant.

Contains correspondence between Ronald L. Panton of The Spooner Machinery Company Limited and Jack Russell and C.M. Dare regarding the purchase of a Sandvik Steel Band Oven with Terminal Length for biscuit manufacturing. File includes price listing, specifications, tender, and 5 sheets of technical drawings of the biscuit plant, biscuit oven, and zone control cubicle.

Contains one architectural drawing of the Southland plant. The drawing was done by The Haskell Company and is a watercolour, pen and pencil crayon drawing of the exterior of the Southland plant.

Series consists of maps of East and West Garafraxa Townships.

File consists of material relating to the purchase of land by Electrohome from the Canadian National Railway Company, Real Estate Management (Toronto, ON). Includes agreements, correspondence and memoranda (including e-mail print outs and faxes), ms. notes, photocopies of insurance certificates and cheques, and a notice of hearing (City of Kitchener). File also includes a Plan of Survey of Lot 33, Municipal Compiled Plan 763 in the City of Kitchener, Regional Municipality of Waterloo.

File consists of material relating to business conducted with Grand River Railway Company (Preston, ON) concerning a water main undercrossing of the railway siding at the Electrohome plant on Goodrich Drive (Plant 6). Includes correspondence, agreements, and one architectural drawing created by Bennett & Wright Contractors Ltd. and includes covering letter and a stamp permit.

File consists of material relating to a meeting of the Operations and Environment Committee on May 20, 1970 to discuss a proposal for a new facility and other business. Includes a meeting agenda, a memorandum, a proposal and other information for the meeting, and two folded lot plans.

File consists of a proposal, distributed to members of the Operations Committee in May 1971, regarding warehouse additions at Plant 6 and Plant 3. Includes two folded lot plans (scales differ).

File consists of two copies of a document entitled Electrohome Facility File, a reference guide to information on the company's facilities prepared by Onorio Cicchini, Facilities Planning. Includes 25 folded lot, plot, and floor plans (scales differ). One copy includes a memorandum annotated "C.A. Pollock".

File consists of material relating to the severance of a portion of the property at 505 Conestoga Boulevard in Cambridge, ON, by Fasco Motors Inc., and the purchase and sale of portions of this property by Electrohome. Includes correspondence (some faxed), forms and agreements (faxed, carbon, and photocopies), photocopies of site plans, ms. notes, and other photocopied material. File also includes two folded copies of a draft plan of survey of part of lot 23, registrar's complied plan 1379 in the City of Cambridge, prepared by J. Douglas Ansley Ltd., Ontario Land Surveyors (Kitchener, ON).

File consists of material relating to the property at 809 Wellington Street in Kitchener, ON; a zone change application and the potential purchase of parts of the property by Northport Landing (Waterloo, ON); and the purchase of parts of the property by First Gulf Development Corporation (Mississauga, ON).

Includes correspondence and memoranda, ms. notes, maps and folded site plans (and some photocopies of same), photocopies of extracts of zoning by-laws, copies of forms, a draft purchase agreement, and other material. Plans depict part 2 of lot 32 and 34, reg. plan 763, reference plan 58R-3130, in the City of Kitchener.

File consists of material relating to the operations of the Building Committee established at Central Ontario Television Limited in 1972 to respond to the need for new studio and office facilities, and material relating to a zone change application and the purchase of land. Includes correspondence and memoranda (some carbon copies), agendas and minutes of Building Committee meetings, draft and final versions of legal documents, draft and final versions of reports, eight folded architectural drawings (including plot plans and site plans), and ms. notes.

File consists of material relating to the operations of the Building Committee established at Central Ontario Television Limited in 1972 to respond to the need for new studio and office facilities, and material relating to a zone change application and the purchase of land. Includes correspondence and memoranda (some carbon copies), agendas and minutes of Building Committee meetings, draft and final versions of legal documents, draft and final versions of reports, eight folded architectural drawings (including plot plans and site plans), and ms. notes.

File consists of incoming and outgoing correspondence regarding electrostatic air purifiers, including inquiries from potential customers in response to an news article. File also includes memoranda, draft and final versions of news releases, copies of a product fact sheet, press clippings, and a drawing of the layout for an instruction booklet.

File consists of material relating to publicity for electronic organs (including Electrohome's first electronic organ, the Allegro), the license for Kinsman electronic organs, and the product line for 1968/69. Includes incoming and outgoing correspondence and memoranda, draft and final versions of news releases (some edited) ms. notes, press clippings, several Kinsman brochures, schedules for a press conference and exhibitions, and four blueline drawings of organs. File also includes six photographs of people playing and posing with organs.

File consists of material relating to the Guelph/Waterloo Education LINK and the donation of equipment for the electronic classroom by Electrohome. Includes invoices, donation request forms, correspondence, brochures about Guelph-Waterloo collaborative science graduate programs, portfolios of material about the University of Guelph and its Research Park, and a blueline print depicting the layout of the electronic classroom.

File consists of material relating to the Guelph/Waterloo Education LINK and the donation of equipment for the electronic classroom by Electrohome. Includes invoices, donation request forms, correspondence, brochures about Guelph-Waterloo collaborative science graduate programs, portfolios of material about the University of Guelph and its Research Park, and a blueline print depicting the layout of the electronic classroom.

File consists of material relating to technical specifications and sales information for fans and their motors, and pricing for merchandise (including furniture and home entertainment products) manufactured for other stores. Includes product literature for fans; typed lists of prices, discounts, distributors, and agencies; memoranda and correspondence; four photographs of fans; and two blueprints of graphs relating to motor operations. Material is divided into the following tabs: Electrohome motor, Eaton's, Simpson's, Hudson's Bay, and Macleod's Limited (latter three tabs are empty).

File consists of material relating to the design and production of radio receivers. Includes 35 blueprints of wiring diagrams, typed descriptions of the diagrams, and typed parts lists.

File consists of a graph relating to the development of a 10-inch diameter fan blade. Graph depicts the maximum watts consumed by the fan and the free air flow.

File consists of material relating to the development of the component parts for the type 5 series of DC motors. Includes technical drawings of the parts, one memorandum, and carbon copies of inspection reports. Titles of technical drawings, issued by Electrohome and Universal Electric Company (Owosso, MI), include: brush spring, spacer, bearing, shaft, wedge, washer, lead eyelet, mounting bracket, field coil, insulator cap, armature winding, armature assembly, field assembly, and communicator assembly. Duplication among drawings may exist.

File consists of material relating to the formation and operations of the Radio Production Alliance and the securing of contracts from the Department of National Defense for the production of radio equipment during World War II. Includes carbon copies of correspondence and memoranda, ms. notes, one technical drawing, and other documents. Correspondence is among the members of the Alliance, and with the Department of National Defense, Department of Munitions and Supply, and the Royal Canadian Air Force. File probably belonged to Carl A. Pollock.

File consists of a diagram of a telephone receiver cover (part no. B-2694) reprinted on photographic paper, with the original date of 1942. Drawing includes note: "for approval of Dept. of National Defence for air R.C.A.F. ref. no. 10A/4286 type C4".

File consists of material relating to a trip to Art Metal Inc. (office furniture manufacturer in Jamestown, NY) by John Koegler. Includes a memorandum and report about the trip and the company, three Art Metal Inc. sales manuals, ms. notes, photostat press clippings about the electrocoating paint application technique, and four technical drawings. The drawings were prepared by The Globe Tool and Engineering Co. (Dayton, OH), and are titled: "Electrical circuit", "Hydraulic assembly", "Gear counter assembly", and "Counter disengage".

File consists of a patent (carbon copy) with specifications and a technical drawing for a humidifier, invented by Carl A. Pollock.

File consists of a map of Kitchener-Waterloo depicting dates and types of aerial photography that had been mapped, and a study plan of parking facilities on Lancaster and Arnold streets in Kitchener. Both items prepared by the City of Kitchener, planning department.

One plAn of the museum storage layout of Electrohome.

Three assignments of patents by Alex Welker to Pollock Manufacturing Company Limited. The patents are for A tone arm for A talking machine and reproducers for A talking machine.

One technical drawing of A bridge pate.

A service manual for eight tube A.C. receivers. It is unclear if this was produced by Electrohome or An outside source.

One technical drawing of A gear box housing.

Two technical drawings of lead and gromme assembly.

One technical drawing of A motor outline.

File consists of a plan of the Berlin water works at Shoemaker Avenue, showing the proposed outlet of the dam; and a plat of the land of the Berlin Water Works Company. Plat shows land owned by Alexander Shoemaker, Jane Ann Shoemaker, James Potter, Berlin Water Works Company, and Moffett, Hodgkins, & Clarke.

File consists of material relating to the construction of a water tower (on Edward Street, later Duke Street) and a concrete water reservoir and pumping station (at Shoemaker Avenue) for the Berlin water works; sewage disposal works and a trunk sewer extension for the Town of Waterloo; and water works for the Town of Hespler (later Cambridge).

Includes typed specifications and information for bidders (carbon copies), post cards from potential contractors, a proposal (including an architectural drawing), draft and blank contracts, and other documents.

Proposal for water tower from Chicago Bridge & Iron Works; but contract went to L. Mensch (Chicago).

File consists of a blueprint drawn by L.J. Mensch, general contractor (Chicago, IL) of the 500,000 gallon reinforced concrete tank to be built on Edward Street (later Duke Street) in Berlin.

File consists of two architectural drawings by civil engineer and contractor L.J. Mensch (Chicago, IL) probably submitted as part of a tender. Drawings are entitled: "500,000 gallon tank in reinforced concrete for Berlin, Ontario, Canada" and "Reinforced concrete reservoir for Berlin, Ontario, Canada".

File consists of material relating to a proposal by the American Water Softener Company (Philadelphia, PA) to install a filtration system for water from Shoemaker's Lake. Includes the proposal, operating instructions, and technical drawings of various components of the system.

File consists of ten plans by S. Sharpe (city engineer) showing property in downtown Kitchener acquired by the City of Kitchener in 1921. File also includes a plan by Charles Knechtel (architect) showing the subdivision of the Consolidated Rubber Co. Ltd. in Kitchener, locating semi-detached houses.

File consists of correspondence from H.G. Acres, chief engineer, mainly to secretary-treasurer F.P. Adams and his successors P.A. Ballachey (1941-1942) and E.F. Roberts (from 1942), regarding the contracts for the construction of the Shand dam and related work. Letters are carbon copies sent to Marcel Pequegnat. File also includes a blueprint relating to repairs to the Shand dam.

File consists of a blueprint relating to repairs to the Shand dam.

File consists of four plans. Includes two plans by N.J. Goebel entitled "City of Berlin," and two copies of a plan entitled "Canada Furniture Manufacturer's Limited, Berlin, Ont., Simpson Factory and Gaukel Street Properties."

File consists of material relating to property in Walkerton, Ontario, owned by Dixon. He purchased property from Alberta Scott in 1969 and sold property to Decho Properties Ltd. in 1970; he also sold to Robert Foreman in 1972. File includes incoming and outgoing correspondence, deeds, agreements, tax notices and assessments, notices and by-laws for the Corporation of the Town of Walkerton, handwritten notes, etc. File also includes plans of subdivisions in Walkerton (duplicates are present).

File consists of material relating to an addition built to the Dixon cottage at Paradise Lake. Includes architectural drawings (duplicates and photocopies present), handwritten notes, lists of materials, invoices, agreements, brochures for materials, a building permit, a sketch, and other documents relating to the construction of the addition.

File consists of material relating to the Beechwood Park subdivision in Waterloo. Includes a newspaper clipping, a memorandum, information relating to restructions on residential lands, and a plan of the subdivision (plus a duplicate).

File consists of material relating to the costs for Job #124 (Belmont store no. 3). Includes handwritten notes and calculations, cost analysis summary charts, quotations, material lists and estimates, etc. File also includes some cost analysis and material lists relating to other jobs.

File consists of brochures, leaflets, and catalogues advertising doors, including folding doors and garage doors. File also includes an architectural drawing of a door.

File consists of material collected by Dixon relating to house plans and building trends. Includes brochures, articles, and advertisements clipped from magazines and newspapers (for builders, housing developments, etc.; some with annotations) and handwritten notes. File also includes plans for the Maple Heights and Beechwood Park subdivisions in Waterloo (some with annotations) and other architectural drawings, as well as a photostat list of lot prices for Beechwood Park.

File consists of material collected by Dixon relating to house plans and building trends, and primarily to larger ranch-style house plans. Includes articles and advertisements clipped from magazines and newspapers (for house plans, housing developments, etc.; some with annotations), brochures, and architectural drawings (house plans).

File consists of material relating to the purchase of land and the development of an apartment complex in Lindsay, Ontario, by the Westmount Construction Co. Includes charts and notes regarding the costs of the project, a newsletter from the Central Mortgage & Housing Corporation, four drawings of the eight-suite apartment building, and two sketches of kitchen cupboards.

File consists of material relating to the purchase of land and the development of an apartment complex in Lindsay, Ontario, by the Westmount Construction Co. Includes newspaper and magazine clippings, application forms for a loan, an offer to purchase land, a draft propsal for the incorpration of Kawartha Developments Limited, handwritten notes, outgoing correspondence, and a drawing of the proposed apartment complex.

File consists of miscellaneous material relating primarly to the activities of the Westount Construction Co., house plans, and housing developments. Includes brochures and magazine clippings, advertisements, plans and drawings, charts and forms, a letter, and other material.

File consists of material relating to construction and the contacts of the Westmount Construction Co. Includes issues of the Canadian Building Digest and an issue of the Builder's Bulletin (National Reseach Council, Division of Building Research; and Central Mortgage and Housing Corporation respectively), handwritten notes relating to materials costs comparisons, a handwritten listing of subtrades and their contact information, a floor plan, and newspaper clippings.

File consists of a scrapbook containing magazine clippings kept by Dixon as ideas for house plans and layouts, home decor, and home furnishing. Most clippings are related to kitchens and bathrooms. Scrapbook also includes brochures, sketches, and an architectural drawing (ornamental iron railing).

File consists of material relating to building houses and house plans. Includes architectural drawings, clippings from magazines and newspapers, and brochures.

File consists of material relating to designs for built-in cupboards and a fireplace as well as decorative railings, for various jobs. Includes sketches and architectural drawings and handwritten notes.

File consists of house plans.

File consists of plans for the Airewood model house by N.O. Hipel Ltd. (Preston, Ontario).

File consists of plans for an 11-unit apartment building at 45 Avondale Avenue South, Waterloo by Ray Haffner Construction Ltd. File also includes a leaf of typed information about the building and units (rental rates, expenses, amenities, etc.).

File consists of plans by the Westmount Construction Co. for the Avon model house (possibly Job 74). Verso of one drawing notes "Split, #119."

File consists of material relating to Job #67-14, an office building on Belmont Avenue in Kitchener. Includes proposed, revised, and accepted architectural plans and drawings for the building as well as plans from previous jobs of a similar nature. Some plans contain handwritten annotations. File also contains some handwritten notes.

File consists of building plans for Job #67-14, Belmont Shop, Kitchener, by the Westmount Construction Co. Drawn by "A-Plan."